CUSTOM!! SSP Mustang Coupe build updates

I worked on the Mustang today and made some good progress. Should be done soon!

Part 1 HERE!

I used JB weld like Philip recommended and filled the roof in. I cut some small groves on the edges to help it grip.

Since I didn't feel like waiting 4 hours for the stuff to cure I threw it in the oven for an hour at 170 and that did the trick. After a rough sanding I threw some bondo on and back in the oven it went.

Time for paint!!

Quick mock-up before all the major details go in place.

Stay tuned!