Truck Update Part 3

theduckduck
Duck Duck Grey Duck FTMFW!
48
4
2

I finally got the truck bed loose. I applied a liberal use of grinder and BFH and voilà, all four anchors came out. Hopefully tonight I will finally pull the bed off the truck. Also I highly recommend 3M 982C Cubitron sanding discs. They are expensive but Jebus do they cut and last a freaking long time. Bonus Corgi and sleeping Corgi and Great Dane for your time.

Advertisement
I cut the tops off of them and then ground what was left of the top down enough where I was able to smash them out with a hammer.
I cut the tops off of them and then ground what was left of the top down enough where I was able to smash them out with a hammer.
Advertisement
Illustration for article titled Truck Update Part 3
He hates the grinder. He was barking like crazy and shaking the truck jumping up and trying to get at me.
He hates the grinder. He was barking like crazy and shaking the truck jumping up and trying to get at me.
Advertisement
Illustration for article titled Truck Update Part 3
Illustration for article titled Truck Update Part 3